Rf Pairing With Gateway (Pairing) - Ferroli CRP ZONE Manual Del Usuario

If the thermostat is paired with a gateway, but communication is not yet present (waiting for the first message or loss
of connection), the icon
If the thermostat is paired and the communication is present, the icon
is displayed.

6.1 RF pairing with gateway (Pairing)

to pair the thermostat with the gateway, proceed as follows.
From the CONNECT CRP:
1. From the main screen, press the buttons
to select the "Menu" area.
2. Press the button
"fig. 15"
3. Press and hold the buttons
seconds.
70
EN
is off and only the detected room temperature is shown on the display.
. the display shows the menu
and for about 5
cod. 3542B150 - Rev 02 - 04/2022
and
is steady and information on zone status
T U E
C R P
2 3 / 0 7 / 1 9 1 2 : 1 9
M E N U M O D O
2 7
. 5
1 6 . 0 ° C
P R O G R A M A U T O
fig. 14
M E N U
I N F O
S E T T I N G S
T I M E S C H E D U L E
W I F I
fig. 15