Technical Data; After-Sales/Service; Guarantee - AL-KO CSA 1820 Manual De Instrucciones

GB
In addition, if the symbol Hg, Cd or Pb appears
under the rubbish bin, this stands for the follow-
ing:
■
Hg: Battery contains more than 0.0005 %
mercury
■
Cd: Battery contains more than 0.002 % cad-
mium
■
Pb: Battery contains more than 0.004 % lead
Rechargeable batteries and batteries can be
handed in at the following places at no charge:
■
Public service disposal or collection points
(e.g. municipal building yards)
■
Points of sale of batteries and rechargeable
batteries
■
Disposal points of the common take-back
system for the used batteries of appliances
■
Disposal point of the manufacturer (if not a
member of the common take-back system)
These statements apply only to rechargeable bat-
teries and batteries that are sold in the countries
of the European Union and that are subject to
European Directive 2006/66/EU. Different provi-
sions can apply to the disposal of rechargeable
batteries and batteries in countries outside the
European Union.

13 TECHNICAL DATA

Technical data: see table of the technical data at
the beginning of this user manual.

15 GUARANTEE

We will resolve any material or manufacturing faults on the appliance during the legal warranty period
for claims relating to faults, in accordance with our choice either to repair or replace. The legal warran-
ty period is determined by the legislation of the country in which the appliance was purchased.
Our warranty promise applies only if:
■
These operating instructions are heeded
■
The appliance is handled correctly
■
Original spare parts have been used
The guarantee excludes:
■
Paint damage that can be attributed to normal wear and tear
■
Wear parts that are marked with a frame
The guarantee period commences with purchase by the first end user. The date on the proof of pur-
chase is decisive. In the event of a guarantee claim, please take this guarantee declaration and the
original proof of purchase, and contact your dealer or the nearest authorised customer service centre.
This statement does not affect the purchaser's statutory claims for defects against the vendor.
40
* Notes to the vibration emission and noise emis-
sion values:
■
The declared vibration emission and noise
emission values have been measured ac-
cording to a standardised test method and
can be used to compare one power tool with
another.
■
The declared vibration emission and noise
emission values can also be used for an ini-
tial assessment of the exposure (vibration ex-
posure degree).
■
The vibration emission and noise emission
values may differ from the given value during
actual use of the power tool, depending on
how the power tool is used.
■
Adhere the safety measures according to the
safety chapter. Try to keep the vibration load
as low as possible. Exemplary measures to
reduce vibration are the wearing of gloves
when using the tool and the limitation of
working time. All parts of the operating cycle
must be taken into account (e.g. times when
the power tool is switched off and those in
which it is switched on but runs without load).

14 AFTER-SALES/SERVICE

In the event of questions of warranty, repair or
spare parts, please contact your nearest AL-
KO Service Centre. These can be found on the
Internet at:
www.al-ko.com/service-contacts
The warranty becomes void in the case of:
■
Unauthorised repair attempts
■
Unauthorised technical modifications
■
Non-intended use
xxxxxx (x) on the spare parts card
Technical data
CSA 1820