15. Hose lock
16. Lift eye
17. Control panel, refer to
on page 17
18. On/Off
19. Hour meter
20. Wheel brake
21. Floor nozzle
22. Rubber strips
23. Hose nozzle (DE 110i)
24. Dust extraction hose
25. Cable tie
26. Handle pipe
27. Operator's manual
Symbols on the product
WARNING: This product can be
dangerous and cause serious injury or
death to the operator or others. Be careful
and use the product correctly.
Read the manual carefully and make
sure that you understand the instructions
before you use the product.
Use hearing protection, eye protection
and respiratory protection. Refer to
Personal protective equipment on page
15 .
Do not use metal hooks, chains or other
lifting equipment with rough edges that
can cause damage to the lifting eye. Only
use soft lifting straps.
VARNINGI
Denna utrustning
WARNING! This appliance contains
H
innehaller halsofarligt damm.
dust hazardous to health.
Tomning och service,
Emptying and maintenance
inklusive lterbyte far endast
operations, including removal of the
av
med
dust bag, must only be carried out by
authorised personnel, wearing
lamplig personlig skydds
utrustning.
suitable personal protection.
far ej anvandas utan komplett
Do not operate without the full
ltersystem .
ltration system tted.
This device is H-classified, certified by a third party
according to IEC-60335-2-69, EN-60335-2-69 Annex
AA.
This device contains harmful dust. Empty and
maintenance operations, including the removal of the
dust collection containers, may only be carried out by
experts who wear appropriate protective equipment.
Never operate the dust extractor without the complete
filtration system.
The product is not domestic waste.
Recycle it at an approved disposal
location for electrical and electronic
equipment.
10
Functions of the control panel
ACHTUNGI
Dieses Gerat enthalt
MISE EN GARDEI Cet appareil contient
gesundheitsschadlichen Staub.
des poussieres dangereuses pour la sante.
H
Leerungs- und Wartungsvorgange,
Les operations de vidage et d · entretien y
a
einschliesslich der Beseitigung der
compris 1 • enlevement du sac
poussiere,
Staubsammelbehalter,
nur von
ne doivent etre
que par du
Fachleuten
werden, die
personnel autorise,
des
entsprechende Schutzausrustung
equipements de protection appropries.
Tragen. Diese darf nicht ohne das
Ne pas faire fonctionner avant que les
vollstandige Filtrationssytem be
systemes de ltration complets soient en
trieben werden.
place.
(Fig. 17)
If the product features Bluetooth
technology. The Bluetooth
be marked on the product name label.
Bluetooth
Refer to
on page 17 .
Note:
Other symbols/decals on the product refer to
special certification requirements for some markets.
Symbols on the battery and/or on the
battery charger
(Fig. 2)
The product or package of the product is
not domestic waste.
(Fig. 3)
Recycle the product at an applicable
disposal location for electrical and
electronic equipment.
(Fig. 4)
Do not put the battery in water.
(Fig. 5)
Keep the battery away from sunlight, heat
or open flame.
(Fig. 6)
The product has protection against
splashing water.
(Fig. 7)
Functional grounding.
(Fig. 8)
Fail-safe transformer.
(Fig. 9)
Use and keep the battery charger indoors
only.
(Fig. 10)
Double insulation.
Embedded connectivity
The cloud asset management solution Husqvarna
™
Fleet Services
gives the fleet manager an overview
of all products that are connected via either
embedded or aftermarket sensors. The position
of the gateway or smartphone can be used to
indicate the location of connected products. The
sensors record data like runtime, service intervals
and more. For more information about the cloud
asset management solution Husqvarna Fleet Services
download the iOS or Android app Husqvarna Fleet
Services at https://apps.apple.com/se/app/husqvarna-
fleet-services/id1334672726 or https://play.google.com/
store/apps/details?id=com.husqvarna.hfsmobile&hl=en.
Speak to your Husqvarna sale representative for more
information.
Some types of this product are connected via the
embedded Husqvarna Fleet Services
the Bluetooth Low Energy (BLE) function. For more
information regarding how to use it, refer to
embedded connectivity with fleet on page 17 . For
®
wireless
®
symbol will
®
wireless technology
™
™
sensor that has
To use
1618 - 004 - 24.01.2022
,