en | us-ca
Battery charger
Charging time
Storage temperature
range
Charging temperature
Dimension
Weight
Degree of protection
Battery pack
Type
Battery voltge
Capacity
Weight
Intelligent battery
Noise and vibration information
Measured values are determined according to EN 62841.
Cordless
Sound pressure level (L
Sound power level (L
Sound measurement uncertainty K
Vibration emission value a
Vibration emission uncertainty K
Specifications subject to change without prior notice. Model range may vary between markets.
*
In order to reflect normal working conditions of the sander the operating conditions did deviate from the standard
method as follows: Grain size of the abrasive was 5 m. Feed force was 10 N.
*
The values stated in the table are derived from laboratory testing in conformity with stated codes and standards and
are not sufficient for risk evaluation. Values measured in a particular work place may be higher than the declared
values. The actual exposure values and amount of risk or harm experienced by an individual are unique to each situ-
ation and depend upon the surrounding environment, the way the individual operates the machinery, the particular
material being worked, work station design and the user's exposure time and physical condition. Mirka Ltd accepts
no responsibility for the consequences of using declared values instead of actual exposure values for any individual
risk assessment.
Further occupational health and safety information can be obtained from the following websites:
https://osha.europa.eu/en (Europe) or http://www.osha.gov (USA)
Proper use of tool
This polisher is designed for polishing all types of materials such as paints, metals, wood, stone, plastics, etc., using polish
specially designed for this purpose. Do not use this polisher for any other purpose than that specified without consulting
the manufacturer or the manufacturer s authorized supplier. Do not use backing pads that have a working speed of less
than the maximum rated speed of the tool's free speed. Any maintenance or repair work requiring the motor housing to
be opened may only be carried out by an authorized service center.
314
Mirka® ARP-B 300NV & Mirka® AROP-B 312NV
Mirka BCA 108
< 50 min (2.5 Ah)
< 100 min (5.0 Ah)
-20 °C 80 °C (-4 °F 176 °F)
4 °C 40 °C (39 °F 104 °F)
191 x 102 x 86 mm
(7 1/2 x 4 x 3 3/8")
0.66 kg (1.5 lbs)
II /
Mirka BPA 10825
Rechargeable
Li-ion 3INR19/65
10.8 VDC
2.5 Ah / 27.0 Wh
0.18 kg (0.4 lbs)
Yes
ARP-B 300NV
)
57 dB(A)
pA
)
68 dB(A)
WA
3.0 dB(A)
*
2
1.8 m/s
h
*
2
1.5 m/s
Mirka BPA 10850
Rechargeable
Li-ion 3INR19/65-2
10.8 VDC
5.0 Ah / 54.0 Wh
0.38 kg (0.8 lbs)
Yes
AROP-B 312NV
60 dB(A)
71 dB(A)
3.0 dB(A)
2
4.3 m/s
2
1.5 m/s