Noise And Vibration Information; Battery And Charger - MIRKA ARP-B 300NV Instrucciones De Manejo

en (original)
Battery charger
Degree of protection
Battery pack
Type
Battery voltge
Capacity
Weight
Intelligent battery

Noise and vibration information

Measured values are determined according to EN 62841 and EN 60745.
Cordless
Sound pressure level (L
Sound power level (L
Sound measurement uncertainty K
Vibration emission value a
Vibration emission uncertainty K
Specifications subject to change without prior notice. Model range may vary between markets.
* In order to reflect normal working conditions of the sander the operating conditions did deviate from the standard
method as follows: Grain size of the abrasive was 5 m. Feed force was 10 N.
* The values stated in the table are derived from laboratory testing in conformity with stated codes and standards and
are not sufficient for risk evaluation. Values measured in a particular work place may be higher than the declared
values. The actual exposure values and amount of risk or harm experienced by an individual are unique to each
situation and depend upon the surrounding environment, the way the individual operates the machinery, the par-
ticular material being worked, work station design and the user's exposure time and physical condition. Mirka Ltd
accepts no responsibility for the consequences of using declared values instead of actual exposure values for any
individual risk assessment.
Further occupational health and safety information can be obtained from the following websites:
https://osha.europa.eu/en (Europe) or http://www.osha.gov (USA)
Proper use of tool
This polisher is designed for polishing all types of materials such as paints, metals, wood, stone, plastics, etc., using polish
specially designed for this purpose. Do not use this polisher for any other purpose than that specified without consulting
the manufacturer or the manufacturer s authorized supplier. Do not use backing pads that have a working speed of less
than the maximum rated speed of the tool's free speed. Any maintenance or repair work requiring the motor housing to
be opened may only be carried out by an authorized service center.

Battery and charger

The battery pack is not fully charged out of the carton. First read the safety instructions and then charge your battery
according to the instructions.
For optimal charging capacity the battery should be charged at an ambient temperature between 18 °C (64 °F) and 24
°C (75 °F). To prevent damage to the battery pack, do not charge the battery pack where the air temperature is below
4 °C (32°F) or above 40 °C (104 °F).
To obtain the longest possible battery life, we suggest the following:
Store and charge your battery in a cool area. Temperatures above or below normal room temperature will shorten
battery life.
74
Mirka® ARP-B 300NV & Mirka® AROP-B 312NV
Mirka BCA 108
II /
Mirka BPA 10825
Rechargeable
Li-ion 3INR19/65
10.8 VDC
2.5 Ah / 27.0 Wh
0.18 kg (0.4 lbs)
Yes
ARP-B 300NV
) 57 dB(A)
pA
) 68 dB(A)
WA
3.0 dB(A)
* 1.8 m/s 2
h
* 2
1.5 m/s
Mirka BPA 10850
Rechargeable
Li-ion 3INR19/65-2
10.8 VDC
5.0 Ah / 54.0 Wh
0.38 kg (0.8 lbs)
Yes
AROP-B 312NV
60 dB(A)
71 dB(A)
3.0 dB(A)
4.3 m/s 2
2
1.5 m/s