Beper P101COS001 Manual De Instrucciones página 29

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 62
Pressure Multicooker Use Instructions
Pressure program use example
Insert the container into the main unit and insert the selected food and/or liquid into the container.
If you have selected the Steam/Egg program, pour approximately 700ml of water into the container.
Then insert the grill so that the food is not in the water.
Close the lid and the pressure valve by turning it to the left or right to the locking position, the symbol
must be in correspondence with the symbol
Use the Manual button to select the desired program. Its LED indicates the selected program.
Using the Adjust button, select the desired cooking setting from Less - Normal - More.
Use the + and - keys to set the desired cooking time.
After about four seconds, the pressurization/heating phase begins. An animation appears on the
display during the process.
If steam constantly escapes from the pressure valve during this process, check the position of the
pressure valve and close it if necessary, by turning it to the left or right using the markings as a guide.
Once the working pressure is reached, the display will show the selected cooking time again. The
selected program starts, and the timer counts down in 1-minute intervals.
During the running program, the pressure cooker may start a pressurization/heating process again.
This is again symbolized by an animation on the display. It is not necessary to intervene.
When the process is complete, the pressure cooker emits ten beeps. Meanwhile, the Keep Warm
program starts automatically. End the cycle by pressing the Keep Warm/Cancel button.
Cooking programs without pressure
Program
Slow Cook
Sauté
Yoghurt
Slow cooking
Insert the container into the main unit and insert the selected food and/or liquid into the container.
Make sure to leave the lid open during the cooking process, so the symbol (triangle down) on the lid
must be in line with the symbol
The pressure valve must also remain open, so the symbol
symbol
.
Set the selected program.
Use the Adjust button to select the right cooking setting. Finally, set the desired cooking time using
the + and - keys.
Setting
Suggested Uses
Less
Simmer, thicken, boil
liquids
Normal
To brown
More
Fry or brown the
meat
.
(Fig.G).
Notes for users
Be sure to leave the lid and
pressure valve open during this
process
Be sure to leave the lid open
during this process
Manually set the duration
must be in correspondence with the
29
EN

Publicidad

Tabla de contenido
loading

Tabla de contenido