Beper P101COS001 Manual De Instrucciones página 31

Pressure Multicooker Use Instructions
Press the Keep Warm/Cancel button and the symbol
of the keeping warm process. End the process by pressing the Keep Warm/Cancel button.
For safety reasons, the keep warm function switches off automatically after 24 hours. However, it is
recommended not to use this function for more than five hours otherwise the dish may be dry.
Troubleshooting
Problem
The lid doesn't close
The lid closes with difficulty
The lid opens with difficulty
Steam comes out from one
side of the lid
Steam exits from the float val-
ve for more than two minutes
The float valve does not rise
Steam constantly comes out of
the pressure valve
The display does not work
Possible reason
The lid is not in the right posi-
tion
The float valve is blocked
The pot is under pressure
The float valve is blocked
The pressure cooker is dama-
ged
The lid is not closed properly
The pressure valve is in the
wrong position
There is food residue on the
float valve seal
The float valve seal is dama-
ged
There are too few ingredients
or too few water in the contai-
ner
The float valve is blocked by
the cover retainer (pin)
The pressure valve is not in the
locked position
The power cord is not con-
nected properly
The electrical fuse of the pro-
duct has blown
31
appears on the display indicating the start
Solution
Align the lid as described in the
appropriate section
Press the float valve down with
a pin
Relieve pressure by opening
the pressure valve
Press the float valve down with
a pin
Contact customer service
Close the lid properly
Turn the pressure valve to the
correct position
Clean the float valve gasket
Contact customer service
Fill the container a little more
Close the lid completely
Turn the pressure valve to the
symbol
Plug in the power cord
Contact customer service
EN