Sony FW-100BZ40J Manual De Instalación página 7

4
Detaching the Table-Top Stand
from the LCD Monitor.
 Remove one side of the Table-Top Stand at a
time. Firmly hold the Table-Top Stand
securely with both hands while the other
people lift up the LCD Monitor.
 Repeat the previous step and remove the
other side of the Table-Top Stand.
Note
• Three or more people are required to detach the
Table-Top Stand.
• Be careful not to use excessive force while
detaching the Table-Top Stand from the LCD
Monitor as it may cause the LCD Monitor set to fall
resulting in personal injury or physical damage to
the LCD Monitor.
• Take care when handling the Table-Top Stand to
prevent damage to the LCD Monitor.
• Be careful when lifting the LCD Monitor as the
Table-Top Stand is detached, the Table-Top Stand
may topple over and cause personal injury.
• Take care when removing the Table-Top Stand from
the LCD Monitor to prevent it from falling over and
damaging the surface that the LCD Monitor is
sitting on.
• Do not remove the Table-Top Stand for any reason
other than to install corresponding accessories on
the LCD Monitor.
• Be sure the LCD Monitor is vertical before turning
on. To avoid uneven picture uniformity do not
power on the LCD Monitor with the LCD panel
facing down.
FW-32BZ30J only
1
Detaching the Table-Top Stand
from the LCD Monitor.
To detach the Table-Top Stand from the LCD
Monitor, remove the screws.
Note
• Do not remove the Table-Top Stand for any reason
other than to install corresponding accessories on
the LCD Monitor.
• Be sure the LCD Monitor is vertical before turning
on. To avoid uneven picture uniformity do not
power on the LCD Monitor with the LCD panel
facing down.
• Place the LCD Monitor with its screen facing down
on a level and stable surface covered with a thick
and soft cloth when removing the Table-Top Stand
from the LCD Monitor to prevent damaging the
surface of the LCD Monitor.
2
Remove the screws from the
rear of the LCD Monitor.
Soft cloth
7
(GB)