Transport And Interim Storage; Application - Wilo PB BOOST FIRST Instrucciones De Instalación Y Funcionamiento

3

Transport and interim storage

4

Application

Installation and operating instructions Wilo-PB BOOST FIRST
When receiving the product, check that it has not
been damaged during transport. If any damage is
found, take all necessary measures with the carrier in
the time provided.
WARNING
The storage environment may cause dam-
age to the product
If the delivered material is to be installed at a later
date, store it in a dry place and protect it from
impacts and any external influences (humidity,
frost etc.). Temperature range for transport and
storage: -30 °C to +60 °C.
Handle the product with care so as not to damage it
prior to installation.
The Wilo-PB BOOST FIRST is a glandless automatic
water supply and pressure boosting pump for do-
mestic use.
These devices detect a minimum flow rate generated
by the opening of a tap or tap point. This minimum
flow detection causes the pump to start, which gen-
erates an increase in flow and pressure.
The closing of the draw-off point is automatically
detected and the pump stops immediately.
For proper use of the product, please observe the in-
structions in this manual.
en
15