Brita PURITY 450 Steam Manual De Instrucciones página 16

Filter system
PURITY 450 Steam
PURITY 600 Steam
PURITY 1200 Steam
• The fi lter system is not resistant to heavily concentrated cleaning agents (e.g. bleach,
chlorinated solvents, heavy oxidants) and must not come into contact with them.
• The fi lter system must not be opened or dismantled during operation. The fi lter
cartridge must not be opened.
• The pressure vessel and pressure vessel lid of the fi lter system are designed for
a service life of 10 years (from the date of installation). It must be replaced after
10 years. The hoses must be replaced in rotation after 5 years.
• Production date:
Production code sticker fi lter cartridge and packaging – Example: B812002010
8 Production year, here: 2008
12 Production week, here: calendar week 12
002 Batch No. fi lter medium, here the second batch fi lled in terms of quantity
010 Serial number of the fi lter cartridge, here the tenth cartridge from the second batch
Production code sticker connector head – Example: 8122 D 11882
8 Production year, here: 2008
12 Production week, here: calendar week 12
2 Production day from Monday (1) to Friday (5), here: Tuesday
D D = without measuring and display unit
11882 Consecutive identifi cation number
Production date pressure vessel and pressure vessel lid – Example: 0308
03 Production month, here: March
08 Production year, here: 2008
3.5 Technical Safety Assembly Instructions
• The terminal device operated with the fi lter must be free of limescale prior to
installation.
• Protect the fi lter system from sunlight and mechanical damage. Do not assemble
near sources of heat and open fl ames.
• A stop valve must be installed before the fi lter system intake hose.
• If the water pressure is greater than 6.9 bar or if there are statutory requirements,
a pressure reducer must be installed upstream of the fi lter system.
• A non-return valve tested by the DVGW has been factory-installed at the water intake
of the fi lter head.
• No copper pipes and no galvanised or nickel-plated pipes/connectors may be
installed between the water fi lter and the consumer. The use of BRITA hose sets is
recommended here. When choosing the material for parts that come into contact
with water after the BRITA fi lter system it must be remembered that, due to the
process, decarbonised water contains free carbon dioxide.
• All parts must be installed in accordance with the country-specifi c guidelines on the
installation of drinking water facilities.
• For erection and operation of the fi lter system, the BG rules "Working in Kitchens" of
the specialist committee "Foods" of the BGZ (BGR111) must be observed.
14
Flushing volume X
after 2–3 days stagnation
6 litres
12 litres
24 litres
Flushing volume Y
after 4 weeks stagnation
30 litres
60 litres
120 litres