Changing The Side Of Hinges (Din Direction) - G-U B-2156 Serie Manual De Instrucciones

Install a profile cylinder after turnkey completion.
Before installing the profile cylinder, read and follow the documentation of the manufacturer.
NOTE
1. Remove the cylinder fixing screw from the slotted insert.
2. Using a screwdriver, turn the cylinder locking cam in the slotted insert until the slotted insert can
3. Remove and dispose of the slotted insert.
4. Insert the profile cylinder. Never use a hammer or similar!
5. Screw on the profile cylinder with the cylinder fixing screw hand-tight.
6. Check the function of the lock with the door opened.
2
3.3
1
E
3
be pushed out. Never use a hammer or similar!
.
.
1

Changing the side of hinges (DIN direction)

.
ISR 20
.
.
3
.
2
.
4
ISR 20
2–2.5 Nm
180°
43