Wiring Diagrams; Start-Up - G-U B-2156 Serie Manual De Instrucciones

4.3

Wiring diagrams

Statuses of the lock contacts in the de-energised state
NO
C
a)
NO
C
b)
NO
C
c)
NO
C
d)
Statuses of the lock contacts in initial position
The initial position is defined as possible:
„ Operating voltage is applied
„ Door closed (latchbolt locked)
„ Lever handle not actuated
„ Door contact (TK) closed
RS485 A
RS485 B
NC
C
a)
NO
C
b)
NO
C
c)
NO
C
d)
If the door contact (TK) is not used, connect the contact "TK" (pin 01/brown-green) with the
connection "+24 V" (Pin 13/brown).
5.

Start-up

After checking for compliance with the installation and operating instructions, carry out
commissioning with the following steps.
„ Before commissioning, ensure that the installation and operating conditions are fulfilled.
„ Switch on the power supply for the lock.
„ Perform a functional test.
14 WH
GND
13 BN
+ 24 V
09 PK
01 BNGN
10 GY
RS485 A
06 BK
RS485 B
12 GN
08 BU
02 WHGN
04 GYPK
07 RD
11 YE
03 RDBU
05 VT
14 WH
GND
13 BN
+ 24 V
09 PK
01 BNGN
10 GY
06 BK
12 GN
08 BU
02 WHGN
04 GYPK
07 RD
11 YE
03 RDBU
05 VT
230 V AC
24 V DC
TK
51