EMAK Oleo-Mac OM 105J Manual De Uso Y Mantenimiento página 53

(continued)
INTERVAL
Air filter and spark plugs
AFTER 50 HOURS
Lubrication
AFTER 50 ENGINE Hydrostatic transmission on 4x4
HOURS systems
Engine, transmission,
AFTER 100 HOURS
electromagnetic transmission
AFTER 200 ENGINE Hydrostatic transmission on 4x4
HOURS systems
Tyres
MONTHLY
Mowing deck
Fuel filter
Battery
Travel drive belt
BEFORE THE
SEASON
Mowing deck
Front axle and steering
Engine
AFTER THE
SEASON
Cables
(PUTTING OUT OF
OPERATION)
Mowing deck
Explanations for table:
1 = Replace more frequently if the riding mower is under greater load or works in outdoor temperatures around 35°C or higher.
2 = If the mower works in a dusty environment, perform the inspection more frequently.
3 = Perform the inspection more frequently if the mower works in a sandy environment.
4 = Perform the inspection more often if a new belt has been fitted.
N = Manual of the manufacturer, supplied with the mower.
Apart from regular maintenance according to the above table, it is necessary to replace motor oil based on the recommendations in
the manual drawn up by the engine manufacturer, which is included with the riding mower.
ASSEMBLY
Inspection, replacement if necessary
Lubrication of parts according to lubrication plan
Oil change
Inspection and adjustment of motion
Oil change
Inspection of pressure
Inspection of tension of the cogged blade drive belt
Replacement
Inspection of electrolyte and cleaning
Inspection and adjustment
Inspection of tension of the cogged blade drive belt
Inspection of the correct tension of the mowing deck drive
V-belt
Inspection and adjustment of play
Oil change
Inspection of mounting, inspection of quick coupler parts
Cleaning
53
ACTIVITY
1,2
6.3.2
6.4
6.3.16
N
6.3.16
6.2.1
6.3.9
N
6.3.1
6.3.12
6.3.9
6.3.8
6.3.11
6.3.2
6.2.1
6.2.2