Battery Status; Connecting Transmitter-Receiver - Nilox HAND SCREEN Manual Del Usuario

B
ATTERY STATUS
Press and hold the record key for 3 seconds to detect the battery level.
• Charged Battery (100% Status): The indicators CH1, CH2, CH3 and CH4 on the back of
the transmitter turn on for 3 seconds and go out, displaying the current frequency.
• Charged Battery (> 80 and < 100 % Status): the indicators CH1, CH2 and CH3 turn on for
3 seconds and go out, displaying the current frequency.
• Half Charged Battery (> 60 and < 80 % Status): the indicators CH1 and CH2 turn on for 3
seconds and go out, displaying the current frequency.
• Running-low Battery (60 % or less): the indicator CH1 turns on for 3 seconds and goes
out, displaying the current frequency.
C
ONNECTING TRANSMITTER
• Turn the video camera F-60 with transmitter on.
• Power the transmitter on, the yellow indicator on the back will stay on and one of the 4
frequency indicators will stay red on.
• Turn the receiver on in order to pair the two elements.
IF THE TRANSMITTER AND THE RECEIVER HAVE DIFFERENT FREQUENCIES PRESS
THE "CH" KEY ON ONE OF THE TWO ELEMENTS AND PAIR THE FREQUENCIES.
Press and hold for 4 seconds the shutter key to enable/disable the laser function.
-
RECEIVER
6