Recommendations For Use - stayer SUPER PLUS Serie Manual De Instrucciones

gb

RECOMMENDATIONS FOR USE

- Only use an electrical extension cord when absolutely necessary,
and providing it has an equal or larger section to the power cable and
is fitted with a grounding conductor.
- Do not block the welder air intakes. Do not store the welder in
containers or on shelving that does not guarantee a suitable
ventilation.
- Do not use the welder in any environment where in presence of
gas, vapors, conductive powders (e.g: iron shavings), brackish air,
caustic fumes or other agents that could damage the metal parts and
the electrical insulation.
The electric parts of the welder have been treated with protective
resins. When used for the first time, smoke may be noticed; this is
caused by the resin drying out completely.
The smoke should only last for a few minutes.
MAINTENANCE
Switch off the welder and remove the plug from the power
socket before carrying out any maintenance operation.
Extraordinary maintenance of the machine must be periodically
carried out by expert staff or qualified electrical mechanics,
depending on the use.
- Inspect the inside of the welder and remove any deposited dust on
the electrical parts (by using compressed air), and in the electronic
cards (using a very soft brush and appropriate cleaning products).
- Check that the electrical connections are tight and the insulation on
the wiring is not damaged.
- 18 -