Joie signature calmi Manual De Instrucciones página 9

Attachment to the base
see images -
11 17
1. Pull up the canopy as illustrated while pressing the buttons on both
sides.
11
2. Check to make sure the handle is secure before placing the child in
-1
the lie-flat car cot.
12
!
Make sure that the handle is in the correct position of use before
carrying or lifting.
3. Install the lie-flat car cot onto the base
indicators should turn green when the lie-flat car cot and base are
securely connected.
14
!
Please check that the mesh at the bottom of the lie-flat car cot is
fixed properly before installing lie-flat car cot.
!
Check that the lie-flat car cot is locked onto the base by lifting the
handle.
4. Press the ISOFIX adjustment and push the base back until it comes
in contact with the vehicle seat backrest.
5. To release the lie-flat car cot, squeeze the infant carrier release
-1
button on the base , then lift the lie-flat car cot up.
15
6. When lie-flat car cot is installed on base, the correct installation is
shown in . The incorrect installation is shown in
16
7
, the child restraint
13
13
-2
15
.
17
Securing Child
see images -
18 27
1. Remove the lie-flat car cot apron from the velcros on the side.
2. Press the harness adjustment button while pulling the both shoulder
harnesses of the enhanced child restraint to the desired length.
3. Undo the buckle by pressing the red button.
!
We recommend using the infant insert while the baby is under
60cm and until they outgrow the insert.
4. Place child into the enhanced child restraint and engage the buckle.
23 24
5. Tighten the shoulder harness straps by pulling the adjustment
webbing.
25
!
Make sure the space between the child and the shoulder harness
straps is about the thickness of one hand.
6. Place the apron back on the lie-flat car cot.
7. The canopy window can be opened for ventilation.
18
19 20
21
22
26
27
8