Grundig RCD 5050 Manual De Instrucciones página 24

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 51
INFORMATION
Troubleshooting
If a fault occurs, first refer to this information
before you take the device for repair.
If you are unable to rectify the fault using the in-
formation given here, contact your local dealer
or service specialist.
Problem
General
No sound.
The device does not
respond to button com-
mands. The device
suffers malfunctions
during playback.
Radio
Poor radio reception.
CD
Playback will not start.
The CD player skips
tracks.
CD-Rs or CD-RWs are
not being played back,
or being played back
incorrectly.
Data media
No playback from USB
or SD.
All manuals and user guides at all-guides.com
------------------------------------------------------------------------------------------------------------------
Possible cause
The volume setting is too low.
The headphones are connected.
The batteries are flat.
The batteries are incorrectly in-
serted.
The mains cable is incorrectly
connected.
Static electrical discharge or
electrical fast transient (burst).
Weak radio antenna signal.
Interference from electrical de-
vices such as televisions, video
recorders, computers, neon lamps
etc.
The CD is damaged or dirty.
A stored track memory is being
played.
The RANDOM function is acti-
vated.
The CD is faulty or the software
or hardware settings were incor-
rect during burning.
Data medium incorrectly format-
ted. MP3 player or USB memory
stick incompatible.
Under no circumstances should you attempt to
repair the radio recorder yourself, as this would
invalidate the guarantee.
Remefy
Adjust the volume.
Unplug the headphones.
Replace the batteries.
Insert the batteries correctly.
Connect the mains cable properly.
Switch off the device, disconnect the
mains cable and plug it in again after
a few seconds.
Remove any batteries.
VHF (FM): tilt and turn the tele-
scopic antenna. Switch to mono
reception.
Keep radio recorder away from
electrical devices
Replace or clean the CD.
Switch to normal playback or delete
Switch off the RANDOM function.
Check the components of your CD
burner / burner software or change
the CD you are using.
Format data medium for FAT 32.
Test using a different MP3 player or
USB memory stick.
ENGLISH
24

Publicidad

Tabla de contenido
loading

Tabla de contenido