Intended Use - Bosch D-tect200C Instrucciones De Funcionamiento Y Seguridad

Dtect200C_2610067510_06-21.qxp_D-tect200 6/14/21 9:30 AM Page 11
Recycle raw materials & batteries instead of disposing of waste. The unit, accessories, packaging & used
batteries should be sorted for environmentally friendly recycling in accordance with the latest
regulations.
The detection tool is intended for the detection of objects in walls, ceilings and floors. Depending on
the material and condition of the base material, it is possible to detect metal objects, wooden beams,
plastic pipes, conductors and cables.
On this basis, clarification is required as to whether the detection tool can be used in places such as
hospitals, nuclear power plants and in the vicinity of airports and mobile phone base stations.
The detection tool is suitable for indoor use.
The numbering of the product features shown refers to the illustration of the detection tool on the
graphic page.
(1) Top marking aid
(2) Wheel
(3) Slot for microSD card
(4) USB Type-C® port
(5) Left-hand and right-hand marking aids
(6) Right-hand function button
(7) Right-hand arrow button
(8) On/off button
(9) Rechargeable battery/battery adapter
release button B)
(10) Rechargeable battery
(11) Gripping surface
(12) Down arrow button
(13) Screenshot button
A) USB Type-C® and USB-C® are trademarks of USB Implementers Forum.
B) Accessories shown or described are not included with the product as standard. You can find the
complete selection of accessories in our accessories range.
Environment Protection

Intended Use

Functional Description
A)
B)
(14) Left-hand arrow button
(15) Left-hand function button
(16) Red start button
(17) Up arrow button
(18) Display
(19) Sensor area
(20) Serial number
(21) USB Type-C® cable
(22) Protective bag
(23) Battery bay
(24) Button cell holder
(25) Button cell holder screw
(26) Button cell port
(27) Button cell B)
-11-
B)
B)