Vivanco UR 5000 Instrucciones Para El Uso página 3

All manuals and user guides at all-guides.com
UR 5000 UNIVERSAL CONTROLLER
6. Finally, test the control code
setting by trying to control (in this example)
your television set. If it does not work at all or
not correctly try a different code from the list
or the code search (see below).
7. To set the remote control for other
appliances, proceed in the same way.
Instead of the TV appliance button, press
another button e.g. DVD, SAT, VCR, CBL.
Please Note
DVD, CBL, SAT/DVB and other Device
•
Codes can be entered into any device modes
except TV & VCR. Just simply press the
device mode key and enter your 4-digit
device code for DVD, CBL, SAT and other
devices.
If the indicator flashes 6 times in step 4,
•
a wrong Device Code has been entered. You
are required to repeat step 2 to 5 again.
Code search
If the brand of your appliance is not in the list
or none of the codes given fits, we
recommend a code search.
Manual code search
1. Switch on the appliance to be
controlled. Program is running.
2. To prepare code search, press
the required appliance button, e.g. TV, the
icon will change to blue colour.
3. Press and hold down P+ and
VOL- simultanously for 3 seconds until the
indicator led (2) lights up.
4. Depending on to be controlled
device enter search code number for: TV:
0001, VCR: 0002, SAT/DVB: 0003, CBL:
0004 or DVD: 0005. Then indicator led (2) will
flash twice and turn off.
5. Press the
button, e.g. TV, again. Icon will change to
blue colour.
6. Press and hold down P+ and
VOL- simultanously for 3 seconds until the
indicator led (2) lights up.
7. Then point the remote control at
the appliance to be controlled.
Vivanco GmbH, D-22926 Ahrensburg, E-Mail:
hotline@vivanco.de, Helpline: +49 (0) 4102 231135 3
required appliance