Leelbox H.265 Manual Del Usuario página 11

PANEL SETTING (whether to display the channel number or the current time during
transmission).
To open the menu PICTURE, select the second icon bottom from the left.
Search
This menu allows you to search the channels, both automatically and manual. To open the
menu SEARCH, select the third icon bottom from the left.
IMPORTANT NOTE: the ANTENNA POWER parameter should normally be left OFF, unless a
portable indoor antenna that requires an external 5Vdc power supply is connected. These
indoor antennas are special antennas and are designed to operate at 5Vdc, taking their power
from the "RF IN" socket on the decoder. By enabling the ANTENNA POWER function and
connecting an antenna cable from the decoder to the indoor antenna, we will supply, through
the same antenna cable, the voltage necessary to power the internal amplifier of the antenna.
So, if the decoder is connected the antenna to the home TV system or an indoor antenna
that does not require a voltage of 5Vdc, the antenna power supply must be left off.
Time
This menu allows the time zone to be adjusted and the decoder to be turned off automatically
using the SLEEP (HOUR) function (it is possible to set from 1 to 12 hours), as per European
1
. By entering POWER ON/OFF you can set the automatic
regulations it is set to 3 hours
switching on and off of the decoder. To open the TIME menu, select the fourth icon at the
bottom from the left.
Option
This menu allows you to change the language of the on-screen menu (OSD), subtitles or audio.
To open the OPTIONS menu, select the fifth icon at the bottom from the left.
This function contributes to energy saving by
ensuring that the device turns off after the time
set after the last command sent via the remote
control. Before switching off, a message is
displayed, see the chapter Energy saving.
9