Leelbox H.265 Manual Del Usuario página 9

The SCART cable (not included) must be inserted in the proper socket on the television,
following the correct polarity provided by the shape of the connector, and in the socket on the
rear of the appliance (see Figure 2), automatically the television will show the home screen of
the decoder, once turned on.
The HDMI cable (not included) must be inserted in the proper socket on the television and in
the socket on the rear of the appliance (see Figure 2). It is recommended to take note of which
TV socket is used (usually it is indicated as HDMI 1, HDMI 2, ....). The TV will not automatically
display the initial screen of the decoder, it will be necessary to select the source using the TV
remote control (see its manual, usually on the TV remote controls it is indicated as SOURCE,
INPUT ...; then choose the HDMI 1 icon .. or HDMI 2 or HDMI 3 based on the HDMI input to
which the HDMI cable is connected).
Boot
Select the video source via the TV settings (see the TV manual for any information), if the
HDMI connection is used; instead with the SCART connection the selection will be automatic.
On the decoder display the "0000" sign will appear.
The home screen INSTALLATION GUIDE allows the choice of the language ("Lingua OSD") and
the country ("Paese"), the possibility to search only the not encrypted (FTA: Free To Air) or
also those the pay-per-view ones (ALL). Moreover, it's possible to choose if supply the antenna
or not (for further info see page 13). The factory settings for language and country are
"Italiano" (Italian) and "Italia" (Italy). Both the parameters can be changed via the arrows keys,
after selecting what is wanted to modify, using the arrows keys on the remote control skip to
the next menu.
7