Leelbox H.265 Manual Del Usuario página 14

MENU button on the remote control and the arrow keys, and then to the submenu CHANNEL
EDIT, using the arrow keys and the OK key. Or opening the channel list with the OK key and
the pressing the YELLOW key on the remote control.
The CHANNEL EDIT menu allows you to delete one or more channels, move them, lock them,
add them to the favorites list skip one or change their name.
To delete a channel, press 1 on the numeric keypad of the remote control, the first icon on the
top left (bin, ) is highlighted, use the arrow keys to position the channel to be deleted and
press the OK key. Next to this appears, the channel has not yet been deleted, you can cancel
the selection by typing OK (the red disappears). When you have finished selecting the
channels to delete, press the EXIT button, the system asks you to confirm the action (saving
the deletion will be effective).
NOTE: The selected channel is deleted, and the list is repositioned to cover the hole. You can
select the entire list by pressing the RED button on the remote control.
IMPORTANT: The deleted channel can only be recovered through a new channel search.
To move a channel, type 2 on the numeric keypad of the remote control, the second icon on
the top left (arrows, ) is highlighted, use the arrow keys to position the channel to be moved,
press OK, two red arrows ( ) will appear next to them, with the arrow keys move it to the
desired location. At the end, press the EXIT button, the system asks you to confirm the action
(saving the move will be effective).
NOTE: The channel is moved within the list and the numbering is recalculated.
To skip a channel, type 3 on the numeric keypad of the remote control, the third icon at the
top left (arrow, ) is highlighted, use the arrow keys to position the channel to skip, press OK,
a red arrow ( ) will appear next to it. At the end, press the EXIT button, the system asks you
to confirm the action (saving the jump will be effective).
NOTE: The selected channel is not shown in the channel list and the list is repositioned to fill
the gap. You can restore it by following the same procedure above, the symbol will
disappear, and the channel will be visible again.
To lock a channel, type 4 on the numeric keypad of the remote control, the password is
requested (the default is 888888, six eights, to change it see the chapter Change password),
then the fourth icon at the top left (padlock, ) is highlighted, use the arrow keys to go to the
12