Denon AVC-A1SR Instrucciones De Operación página 31

DTS Neo:6 mode
Surround playback can be conducted for the analog
input and PCM digital input 2-channel signals.
1
Select the DTS NEO:6 mode.
DTS
SURROUND
(Main unit) (Remote control unit)
2
Play a program source.
3
Display the Surround Parameter Menu.
(Remote control unit)
4
q Select the various surround parameters.
(Remote control unit)
5
Enter the setting.
(Remote control unit)
NOTES:
• When "Default" is selected and the jog stick is moved to the left, "MODE" and "TONE" are automatically
set to the default value.
• In addition, "CINEMA EQ." is set to OFF.
1
1
4, 5
3
w Adjust the parameters setting.
(Remote control unit)
• Select CINEMA or MUSIC.
(CINEMA is optimum for
movies, MUSIC is optimum
for music software.)
It is possible to switch to the
direct mode using
CINEMA/MUSIC button on
the main unit's panel.
CINEMA /
MUSIC
(Main unit)
Dolby Headphone
The Dolby Headphone mode is set when headphones are connected to the PHONES jack while in the
DOLBY/DTS SURROUND mode.
1
When the SURR.
PARA. button is
pressed, the parameter
selection screen
appears.
(Remote control unit)
2 q Select the parameters.
(Remote control unit) (Remote control unit)
3
Press the "SURR. PARA" button to complete the
setting.
(Remote control unit)
Parameters
MODE:
DH1 ..............Reference room (small room with weak reverberations)
DH2 ..............Live room (room with a bit stronger reverberations than DH1)
DH3 ..............Large room (larger room than DH1, offers a sense of distance and sound diffusion effects)
BYPASS ........Stereo sound.
DECODER:
Select this when playing analog, PCM or other 2-channel sources.
The signals are converted into multichannel signals using the decoders shown below and played in the Dolby
Headphone mode.
PL II C...........Dolby Pro Logic II Cinema mode
PL II M..........Dolby Pro Logic II Music mode
NEO:6 C .......DTS NEO:6 Cinema mode
the
NEO:6 M ......DTS NEO:6 Music mode
OFF...............The signals are played in the Dolby Headphone mode as such (2 channels).
– Recording –
When RECOUT mode is set to "SOURCE", with this amplifier signals encoded in the Dolby Headphone mode
can be output from the recording output terminals and recorded on another recorder. (see page 23)
2
w Select the settings.
(Remote control unit) (Remote control unit)
1, 3
ENGLISH
31