Kärcher K 3.350 Manual De Usuario página 9

STEP 7:

Plug the Ground Fault Circuit Inter-
rupter (GFCI) into a receptacle.
Press RESET button, indicator
should be "ON".
Press TEST button, indicator
should be "OFF".
Press RESET button for use.
We recommend that you test the
GFCI as part of your startup proce-
dure each time you use your pres-
sure washer. To learn how to
peform this test on your unit, visit
http://www.karcherresidential.com/
gfci_test.php for detailed instruc-
tions for your type of GFCI.
WARNING
Do not use if above test fails.
STEP 8:

Unlock the trigger gun safety lock.
Trigger the gun to eliminate trapped
air, wait for a steady flow of water to
emerge from the spray nozzle.
All manuals and user guides at all-guides.com
STEP 9:

Turn on the high pressure washer
(I/ON).
The motor starts only if the trig-
ger of the gun is pulled and shuts
off when the trigger is released.
Note:
This pressure washer has been tested
by Kärcher's quality assurance team. A
small amount of water may be present
in the water inlet or outlet. This is nor-
mal and will not affect the performance
of the pressure washer.
9
English