Assembly And Operation - Metabo HPT DH3628DD Instrucciones De Seguridad Y Manual De Instrucciones

APPLICATIONS
Dust extractor system specialized for drilling concrete,
for use with the following metabo HPT cordless rotary
hammers:
DH3628DD / DH36DPE / DH18DPC
NOTE
This dust extractor system is only to be used for
drilling concrete.
HOW TO USE
1. Attaching and removing the dust extractor system
WARNING
● When attaching, removing, or adjusting the dust
extractor system, in order to prevent an unlikely
accident, be sure to turn off the tool's switch, and
remove the tool's battery and tool bit. (Fig. 2)
Tool bit (drill bit)
● Make sure the dust extractor system is fully
attached.
If not fully attached, the dust extractor system
could come loose and result in injury.

ASSEMBLY AND OPERATION

Battery
Fig. 2
<Attaching the dust extractor system>
(1) Remove cap from tool and store in adapter
NOTE
To avoid misplacing the removed cap, store it in the
adapter's cap storage area. (Fig. 3)
Cap storage
area
(2) Install the adapter to the product
Insert the adapter's pin into the gear cover's hole and
fasten it with the latch. (Fig. 4)
Gear cover hole
Pin (adapter)
English
Cap
Adapter
Fig. 3
Adapter
Fig. 4
7