Filling The Water Tank With Water - Klarstein MISTRAL Manual De Instrucciones

EN
32

FILLING THE WATER TANK WITH WATER

• Make sure that the mains plug has been disconnected from the socket before
removing the water tank.
• Pull the water tank out of the machine. Observe the water level in the water
tank when filling. Do not fill the water tank higher than the MAX mark and
make sure that the water level is not lower than the MIN mark. If the water
level should rise above the MAX mark, it may cause the water to overflow.
• To avoid overflowing or damaging the appliance, do not force the water tank
in or out. To prevent the residual water from running out, make sure that the
residual water in the honeycomb cooling pad has already flowed back into the
water tank before pulling out the water tank.
Highest
Water level
Lowest
Water level