Drain Water; Cleaning And Maintenance - Klarstein METROBREEZE ROM Manual De Instrucciones

EN
38

DRAIN WATER

• When you use the cooling or dehumidification mode, more condensed
water accumulates. When the tank is full, the water-full alarm is triggered
and the unit stops. The full tank indicator will light up. An alarm will sound
until the water level in the tank is below the sensor or the tank has been
manually emptied. Once the alarm goes off, the unit will automatically resume
operation.
• When the alarm sounds, empty the water promptly. Move the unit to a drain,
scrape out the cap and remove the plug. Allow the water to drain completely.
Put the plug back in and close the cap. When the water tank is full, move the
device very carefully so that the water does not spill over and flow out.

CLEANING AND MAINTENANCE

Before cleaning the unit, turn it off and unplug it from the wall outlet.
Cleaning the surface
Clean the surface with a feather duster or a damp cloth. Do not use chemical
cleaners such as gasoline, alcohol or benzene. Otherwise, the surface coating or
the device could be damaged.