Symbols And Icons On The Display; Operation Of The Device - XS Instruments Revio Manual De Instrucciones

RCA for pH temperature probe
Micro USB for connection
to PC and power supply
BNC for pH/ORP electrodes
READ THE MANUAL BEFORE PROCEEDING TO CONNECT THE PROBES OR PERIPHERALS

• Symbols and icons on the display

Symbol Description
Number of data stored in Data Logger
mode on instrumental memory.
Device connected to software
DataLink+.
Calibration deadline set for the
displayed parameter.
Device connected to the mains.
Measurement stability indicator.
Alarm MIN / MAX set for the pH-
Parameter.

Operation of the device

• After the switching on, the instrument enters measure mode in the last parameter used.
To scroll through the different parameter screens, press the key
•
parameter is shown in the display on the top left.
Parameters that use the same sensor are combined by two bands of the same colour on the display (e.g.
the parameters Conductivity, TDS, Salinity and Resistivity have brown bands).
UM ReVio EN rev.0 04.06.2020
ReVio top panel
RCA temperature probe of DO sensor
Symbol
13
RCA for Conductivity
temperature probe
Banana 4mm for
reference electrode
BNC for conductivity cell
BNC for polarographic sensor DO
Description
Error / Alarm
Follow the indications of the string
next to the icon.
FIXED: Automatic Data Logger set
INTERMITTENT: Automatic Data
Logger in operation
HOLD mode, reading locked when
stable.
Battery charge indication.
Password entered.
DHS digital sensor active.
; the current measurement
EN