Instrument Setup Menu - XS Instruments Revio Manual De Instrucciones

Instrument Setup Menu

In measure mode, press key
•
Use the directional keys to move to "SETUP" menu
•
• Move with keys
The table below shows the setup menu structure for the general settings of the instrument; for each
program, there are the options that the user can choose and the default value.
Program Description
Select Parameters
Password
Backlight Mode
Brightness
Sleep Mode
Reading with HOLD
Date format
Date setting
Time setting
Temperature unit option
Select Language
Auto Off
Buzzer Mode
Restore Factory Default
Select parameters
Access this menu to select which parameters to display or hide in measure mode. By default, no parameters
are hidden.
Use the key to set the flag to the parameters you want to keep active and display in measure mode.
•
By removing the flag, the parameter will NOT be displayed in measure mode.
•
• Move through the different parameters with keys
EXAMPLE: the user is only interested in the display of pH, mV, Cond and MULTIVIEW screen.
Access the" Select parameters" menu and by pressing the button
parameters.
Return to measure mode by pressing
, only the parameter screens will be displayed: pH
Password
Access this menu to enter, change or disable the password.
The active password is indicated on the display by the icon
•
• If the password is active, it will be requested from the user to perform the following activities:
• Calibrate the device;
• Delete the data saved in Data Logger mode;
• Change the date and time of the device;
• Modify or deactivate the calibration deadline.
• The password entered by the user consists of 4 numeric characters.
Change the number with the keys
•
UM ReVio EN rev.0 04.06.2020
to access the SETUP menu.
and to select the program to access.
Yes / No for each parameter
Insert Password
Auto – Indoor - Outdoor
Low – Normal - High
Off – On (1 ... 20 min)
No - Yes
yyyy/mm/dd – mm/dd/yyyy – dd/mm/yyyy
-
-
°C - °F
Eng – Ita -Deu – Esp – Fra – Cze - Por
No - Yes
Off – Only Alarm - On
No – Yes
. In measure mode, scrolling the parameters with the button
and
43
and access by pressing the key
Options
, and .
, remove the flag from the remaining
mV COND MULTIVIEW.
  
.
, press the button to move to the next number.
.
Factory Default Settings
Yes
No
Auto
Normal
On / 1 min
No
dd/mm/yyyy
-
-
°C
Eng
No
On
No
EN