tormatic HA MS 400V Manual De Instrucciones Y De Montaje página 20

Return / loading bridge in resting position
The RETURN button will only be active after actuating
the button.
As soon as the loading process is completed, you can move the
loading bridge back to its resting position by actuating the RE-
TURN button. The loading bridge is lifted and then lowered auto-
matically until it reached its resting position, without a button be-
ing actuated.
Chargeable lamp (optional)
As soon as the door has reached the open position, the
chargeable lamp connected to X6 is switched on. As soon as the
door leaves the open position, the chargeable lamp switches off
again.
Safety wheel chock (optional)
Only if the wheel chock is positioned behind the truck tyre, the
loading bridge can be lifted and extended (menu 15).
In case of a wheel chock being provided for safety reasons, the
button will only be active if the wheel chock is positioned at the
truck. After the loading bridge is positioned on the vehicle, the
RETURN button can be actuated once, even if the safety chock
has been removed.
Door open sensor (optional)
The door open sensor only permits lifting the loading bridge if the
door is open.
Optical and acoustic warning signal (optional)
During automatic return of the loading bridge, a warning signal is
emitted.
Key switch function (optional)
The control is provided with an input for a key switch. This allows
you to activate various functions using menu item 50, "Key switch
function".
18 - EN
Loading bridge status display
Display State
Control ready to operate
Loading bridge moves back to resting position
Loading bridge is lifted
Loading bridge is lowered
Support is swivelled out
Support is swivelled in
Loading bridge in stop or resting position
Loading bridge in floating position
Symbol flashing: Restart lock active
Symbol permanently illuminated: Safety circuit active
Have service carried out by a technician
Decommissioning of the loading bridge
1. Press the RETURN button to move the loading bridge back
to the resting position.
2. Set the main switch to the "0" (Off) position.
3. Secure the main switch against switching-on.
HA MS 400V / 230V