WIR IN G CO N NEC TIONS AND EARTHING
Before putting the plug into the power socket, make sure the mains voltage is the same as the
one shown on the technical specification plate (located inside the Minibar) and that the socket
is equipped with proper earthing, as laid down in the regulations on wiring system safety. Also,
the power socket must be able to hold up to the maximum power of the device, shown on the
same plate.
ATTENTION PLEASE!
If the socket is not equipped with an earthing system or if multiple sockets or adaptors are
used, the Manufacturer will not be liable for any injury or damage to things and/or to the
Minibar.
ATTENTION PLEASE!
The user must always be able to access the power supply socket.
ATTENTION PLEASE!
If the power cord is damaged, it must be replaced by the manufacturer or its service agent or a
similarly qualified person in order to avoid a hazard.
23