K ECOSMART PV BL ACK
If you press the button P4, the display will show the following:
PRESET PROGRAMS FOR K VERSION, IN WHICH
A PANEL CAN BE INSTALLED ON THE DOOR
TIME
ON 1
TIME
ON 2
The programme P4 allows the user to set two refrigerator working cycles (the first cycle Time on1 –Time
off1 and the second cycle Time on2 and Time off2).
To customise the programme P4:
press P1 and P4 simultaneously.
"Time On1" will start to flash on the left.
Use the buttons - (P2) and + (P3) to set the starting time of the first cycle.
Press the button P1 to move ahead to the following fields and then use the - and + buttons again to
change the starting and stopping time of the operation cycles of the compressor.
After completing the customisation of the programme, press P4 to save the new settings.
NOTE: After having used the minibar with the TIMER operation method, to pass again in STANDARD
operation method, please set P4 on the remote control with all value at 00:00 and push P4 (see instruc-
tion SETTING THE TIME).
NOTE: after having used the minibar with the SMART operation method, to pass again in STANDARD
operation method, unplug the SIGANL cable and st P4 on the remote control with a value at 00.00 and
push P4 (see instruction SETTING THE TIME).
HI N T S A N D T IP S
Normal operating sounds
The following sounds are normal during operation:
• A faint gurgling and bubbling sound from coils sound when refrigerant is pumped.
• A whirring and pulsating sound from the compressor when refrigerant is pumped.
• A sudden cracking noise from inside appliance caused by thermic dilatation (a natural and not
dangerous physical phenomenon).
• A faint click noise from the temperature regulator when the compressor switches on or off.
Hints for energy saving
• Do not open the door frequently or leave it open longer than absolutely necessary.
K ECOSMART PV BLACK_IM_20220512
TIME
OFF 1
TIME
OFF 2
PRESET PROGRAMS FOR K
VERSION WITH GLASS DOOR
TIME
ON 1
TIME
ON 2
32
TIME
OFF 1
TIME
OFF 2