Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
ENG
ES
FR
3.5.4. Programming headboards
Access the menu F19 of the configuration menu (see pag.26; Ap. 4.1. Access the mode of programming)
On the screen you can see
On the screen you can see
text, press
to validate. On the screen you can see
If you want to continue press
On the screen you can see
add text, press
to validate. On the screen you can see
If you want to continue press
On the screen you can see
add text, press
to validate. On the screen you can see
If you want to continue press
On the screen you can see
add text, press
to validate. On the screen you can see
If you want to continue press
On the screen you can see
press
to validate. On the screen you can see
To exit at any time, press the
3.5.5. Programming the option "calculation of the change"
Access the menu F8 of the setting menu and Activate and Deactivate the "calculation of the exchange".
On the screen you can see
0=desactivated). Press the key
The balance will return to normal weighing mode.
3.5.6. Auto-off
To programm auto-off, press
On the screen you can see
0= desactivate
1= it will turn off after 1 minute when the scale is not used
5= it will turn off after 5 minutes when the scale is not used
30= it will turn off after 30 minutes when the scale is not used
Select with
and press
3.5.7. Eliminate the accumulation
Keep the decimal point pressed during 3 seconds to see the accumulations.
To see the accumulations made press
To eliminate the accumulation which appears on the screen you must press
To exit press the
key. The balance will return to normal weighing mode.
3.5.8. Passes and discounts (available price in negative)
Keep the
key pressed until the unitary Price appears with the symbol minus. Introduce the value to pay
and then press
, introduce the units 1.
Then press the
key to accumulate in the transaction.
24
All manuals and user guides at all-guides.com
F19 Head
. Press the key
Comp NAME
. Press the key
. On the screen you can see
Head 1
(linea 1). Press the key
. On the screen you can see
Head 2
(linea 2). Press the key
. On the screen you can see
Head 3
(linea 3). Press the key
. On the screen you can see
Footer
. Press the key
. You are going to see the cursor on screen to add text,
Footer
key twice. The balance will return to normal weighing mode.
F8 CHANGE
. Press
to get into and modify value with
to validate and press
during the initial counting.
AUto-oFF
: 0,1,5,30
key to validate. The balance will return to normal weighing mode.
and
.
RTI price computing scale with printer
.
. You are going to see the cursor on screen to add
Comp NAME
.
Head1
.
. You are going to see the cursor on screen to
Head1
.
Head2
.
. You are going to see the cursor on screen to
Head2
.
Head3
.
. You are going to see the cursor on screen to
Head3
.
Footer
.
.
to exit.
.
Manual de usuario | Manuel d'usager | User's guide
(1=activated,
Publicidad
Tabla de contenido
