Parameter Setting Table - Baxtran RTI Manual De Usuario

ENG
ES FR
To enter the parameter menus press the
on. The Weight Display will show
Press the key four times. The display will show
The Parameter menu has 20 functions that can be accessed using the
ces.
The WEIGHT display will show the name of the functions. Also you can press
select F2...... To enter a function press the

4.2. PARAMETER SETTING TABLE

DISPLAY DESCRIPTION
When the parameter menu show
The display will then show
After stable indicator on, press the
F0 CAL
(*) The display will then show the calibration weight requested, press the
it.
The display will show
dicator on, press the
Set external resolution, press
F1 rES
(*)
key to sure.
F2
Not available.
F3 CAPA
(*)
Set capacity, press
F4 Po int
(*)
Set weight decimal point, press
F5 Po int
(*)
Set price decimal point, press
F6 RATE
Set the 3 types of possible rates (VAT): Rate A, Rate B, Rate C.
F7
Not available.
F8 CHANGE
Set the change to on/oFF.
9 A-D CoUntS
Displays the A/D counts.
F10
Gravity parameter.
(*)
F11 HALF key
selected.
Set the RS232 type (off/printer). When selected RS232 oFF, accumulation function is
F12 rS232
disabled.
Printer must be always selected.
F13 PRITR TYPE
Set the printer type(off/eltron/zebrl). Eltron must be always selected.
F14 BAUD RATE
Set the baud rate (600/1200/2400/4800/9600).
F15
Set the RS232 mode (7e1/7o1/8n1).
F16 SCALE MODE
Set the scale mode (0/1/2/3). 0 or 3 must be always selected.
Set wether use re tare function, if this parameter is on, you can do tare operation conti-
F17 PETCNT TARE
nuously, if this parameter is off, you only can do tare operation one time, press
to select, press
F18 LANGUAGE
Set the printer format (0: spanish /1: french /2: portuguese).
F19 HEAD
Set the 4 lines of headers and footer (Company, Head1, Head2, Head3, Footer).
26
All manuals and user guides at all-guides.com
key during the initial counting of the display after power turned
Pn
requesting the password number to be entered.
. key. At any time press the
unLoAd
LOAd
. Place the calibration weight on the scale. After stable in-
key. The scale will calibrate.
key to select, press
key function selection: Half/Quarter/100g/Unit (on o oFF). oFF must be always
key to sure.
RTI price computing scale with printer
Pn----
. Press the key.
key to cycle through the choi-
key to return to weighing.
F0
press the key.
to request all weight be removed from the platform.
key to set the zero point.
key to change (3000/60000/duag range), press
key to sure.
key to select, press
key to select, press key to sure.
Manual de usuario | Manuel d'usager | User's guide
to select F0, and key to
key to accept
key to sure.
key