Etac Molift Raiser Pro Manual De Usuario página 5

Technical data
Safe Working Load (SWL):
170kg (375 lbs)
Weight of unit:
10kg
Dimensions:
Height(A): 1,2 m
Height (B): 0,3-0,51 m
Depth (C): 0,63 m
Width (D): 0,54 m
Width (E): 0,37m
Step in height (F): 0,035m
Clearence (G): 0,057m
D
B max
Supplied parts
Leg support 1X
Handle 1x
Right Pipe Left Pipe
1x 1x
Material:
Powder coated aluminum,
Plastic, Steel.
Expected Lifetime:
The Molift Raiser Pro has an
expected lifetime of 5
years or 15000 transport
cycles.
C
E
H
A
G
F
B min
Allen key 1x
User manual 1x
Turning knob 2x
Screws 2x
Base Plate 1x
Molift Raiser Pro / BM43099 Rev G / www.etac.com
Mounting pipes to base plate
1
1. Place the base plate on an even
surface and lock brakes. Insert pipe with
holes facing towards center of plate. Pipe
with label must be at the right, standing
on the assistant side. Insert knob.
Make sure that knob are Properly fastened.
Loose knobs can make the pipes wobbly and
the Molift Raiser Pro unsafe to use.
Mounting leg support
The knee cushions are adjusted individually. The leg support has 7
step adjustment from 0,3 to 0,51 meters. Follow these two steps
when mounting the leg support:
1
1. Pull release wire and slide the leg
support on pipes, cushion faceing
user side.
5
2
2. Tighten knob firmly
by turning knob
clockwise.
2
"Click"
2. Release wire and let
the leg support settle in
desired position.