Preset Tuning - Teac SR-L70i Manual Del Usuario

FM MODE button
Pressing this button alternates between
Stereo mode and Mono mode.
Stereo
When an FM stereo broadcast is received,
the "STEREO" indicator lights on the display.
< If the sound is distorted and the "STEREO"
indicator flashes, the signal is not strong
enough for good stereo reception. In this
case, change to MONO mode.
Mono
To c o m p e n s a t e f o r w e a k FM s t e r e o
reception, select this mode. Reception will
b e f o rce d to b e m o n a u r a l , r e d u c i n g
unwanted noise. The "MONO" indicator
appears on the display.
If the reception is poor
AM broadcast
The AM antenna is built into the main unit.
Rotate or move the unit to find the best
position for AM reception.
FM broadcast
Extend and turn the FM antenna to improve
the reception of a station.

Preset Tuning (1)

You can program 10 FM and 10 AM channel
presets.
Tune in a station you want to save as a
1
preset (page 18).
Press the MEMORY button.
2
W i t h i n 3 s e c o n d s , s e l e c t a p r e s e t
3
channel to store the station using the
PRESET/SCROLL (‡/°) buttons.
Within 10 seconds, press the MEMORY
4
button.
To store more stations, repeat steps to .
1 4
19