Preset Tuning - Teac T-R610 Manual Del Usuario

You can store 60 stations (30 FM and 30 AM) in memory
presets.
Automatic Memory Presetting
1 Select AM or FM by pressing the BAND button.
2
Press the MEMORY button for 1.5 seconds.
Up to 30 of the best received stations in your area will be
stored automatically.
< In FM automatic memory presetting, the unit will scan
frequencies twice, and the better received stations will be
stored.
Manual Memory Presetting
1
Tune in a station you want to listen to (by following
steps 1 to 3 on page 7).
2 Press the MEMORY button briefly.
3
While the "MEMORY" indicator is blinking, select a
channel preset to store the station using the PRESET
CALL buttons (b/5).
8
All manuals and user guides at all-guides.com

Preset Tuning

PRESET CALL TUNING
MEMORY BAND
You can also use the numeric buttons of the remote control
unit provided with the A-R610.
For instance, to select preset number 25, first press the
TUNER button, and then press "2" followed by "5".
To select numbers less than 10, press "0" followed by an
integer 1 through 9. As an example, to select number 5, press
"0" and "5". (Optionally, you may press just the number "5"
and then wait a few seconds.)
4
Press the MEMORY button.
Or leave the unit idle for 8 seconds. The station is stored in
memory, and the "MEMORY" indicator disappears from the
display.
To store more stations, repeat steps
< If you store a new station to a channel, the station previously
stored in the channel will be overwritten.
< You cannot delete preset stations.
How to select preset stations
1
Select AM or FM by pressing the BAND button.
2
Press the PRESET CALL button (b or 5) repeatedly until
the desired preset station is found.
Preset stations can also be selected by the numeric buttons of
the remote control unit.
1 4
through .