Display Item Structure; Main Status Screen Display (Menu Page P00); Information Displays; Status Display - Ingersoll Rand System Automation X4I Manual De Configuración Rápida

DISPLAY ITEM STRUCTURE

All operational system status and values are accessible
from the normal user display. To view status or values
that are not normally visible on the default screen, press
UP or DOWN. All standard User display items are
viewable only and cannot be adjusted. The standard user
display items are shown on three different Menu Page
(P00) screens: "Main Status", "Status Display" and
"Sequence Rotation Display".
All adjustable value, parameter or option item displays
are grouped into "menu mode" lists. Items are assigned
to a list according to type and classification. Item lists
are identified by page number (or menu number). All
adjustable parameters and options are assigned to menu
mode pages "P01" or higher.
MAIN STATUS SCREEN DISPLAY (MENU
PAGE P00)
At controller initialization, all display elements and LED
indicators are switched on for three seconds and then
the normal operating display is shown. In normal
operational display mode, the main display will
continuously show the detected system pressure and the
item display will show the first item of the "Page 00"
menu. User menu "Items" can be selected using the UP or
DOWN buttons at any time. Pressing the ENTER button
will lock any selected Item display and inhibit return to
the default display. When an Item display is locked, the
lock key symbol will be shown. To unlock an item
display, press UP or DOWN to view an alternative Item
display or press RESET or ESCAPE. No item values,
options or parameters can be adjusted in page "P00". If a
fault condition occurs, the fault code becomes the first
list item and the display will automatically jump to
display the fault code. More than one active fault code
item can exist at any one time and can be viewed by
pressing UP or DOWN. The most recent "active" fault will
be at the top of the list.
Main Status Screen
All manuals and user guides at all-guides.com
8

INFORMATION DISPLAYS

To view detailed information applicable to the selected
user menu display item press the enter

STATUS DISPLAY

P00
#1
1
Status Display Screen
If the "Pressure Schedule" feature is active;
shows the day of the week (#1: Monday), the
time of day (18:00) and the table to be used
(T02) of the next scheduled instruction to be
executed.
The current active 'Table' (T01)
1
Upper, or unload, pressure set point
Lower, or load, pressure set point
Minimum pressure alarm (Warning)
Press the escape button to return to the normal
operational display screen.
button:
18:00 T02
102 psi
98 psi
80
psi