Preparations For Operation - MSW Motor Technics MSW-PCSM-100-1 Manual De Instrucciones

3.2. Preparations for operation

POSITIONING THE APPLIANCE
Operate this product in locations where good air circulation is ensured and away
from sources of electromagnetic radiation, fire, and flammables. The ambient
temperature shall be between +5°C and +40°C. The operating location of the
appliance shall provide immediate access to the stop valve of the compressed air
supply and to the power cord plug. The compressed air supply pressure of the
appliance shall not exceed the specified range.
APPLIANCE AIR FLOW LIMITS
TOTAL AIR
FLOW RATE
[Nm /h]
3
6.5
5.5 [Nm 3 /h]
4.0 [Nm /h]
3
The total air flow rate is the transport air plus the make-up air for the powder ratio
(expressed as a percentage). The total air flow rate is thus kept steady.
The specified air flow values are indicative only. Appliance tear and wear, ambient
conditions, and the type of used powder may affect the actual air flow rate.
INSTALLING THE APPLIANCE
AIR FLOW RATE SPECIFICATIONS
FLUIDISED POWDER
RATIO TO AIR
[%]
81
40
0
100
50
0
100
50
0
INJECTOR PUMP
DISCHARGE
(TRANSPORT)
AIR [Nm /h]
3
5.4
3.7
1.8
5.4
3.6
1.8
4.0
2.8
1.8
MAKE-UP AIR
[Nm /h]
3
1.1
2.7
4.6
0
1.8
3.6
0
1.2
2.2