Installationand Mounting; Wall Installation - gsc evolution 301015003 Manual De Instrucciones

EN

INSTALLATIONAND MOUNTING

1. This heater can be installed on feet (provided) or
on a wall.
2. The heater must never be installed underneath a
mains wall socket.
3. The heater must never be installed in a position
where the switches and other controls can be rea-
ched by someone in the bath or shower.
4. The heater works through natural air convection.
In order to achieve correct performance and uni-
form heat distribution, when it is installed on a wall
the lower part of the heater must be at a minimum
distance of twenty centimetres from the floor and a
minimum distance of twenty centimetres from the
sides and fifty centimetres from an upper shelf and
also a minimum distance of twenty centimetres from
any wall or object (furniture and curtains etc).

2. WALL INSTALLATION:

1. Select a suitable location on the wall, which
should be firm and level. Check that there is a mains
socket close by.
2. The distances marked, "a" and "e" vary depen-
ding on the heater model.
Safety distances and installation
Distances in mm.
12 | www.garsaco.com
Tabla 1
Modelos a (mm)
8 Elementos LODEL8 690
LODEL10 830
10 Elementos
Size security instalaltion:
Distances in mm.
3. Open the package box and check that all acces-
sories are present.
A B
C D
E F
b (mm) e (mm) f (mm)
120 420 458
120 560 458