geberit SIGMA10 Instructions De Montage página 34

EN
Operation
Geberit Apps
Various Geberit apps are available for operation, settings and maintenance. The apps communicate with the
device via a Bluetooth® interface.
The Geberit apps are available free of charge for Android and iOS smartphones in the respective App
Stores.
Establish connection with device
▶
Scan the QR code and follow the
instructions on the landing page.
Actuate manual flush
A manual flush is actuated by holding your hand in
front of the infrared sensor.
▶
Hold your hand approx. 15 cm in front of the
actuator plate. There is no need to touch the
actuator plate. Place your hand in the
detection range for approx. 0.5–1 second for
a full flush and for approx. 1–2 seconds for a
partial flush.
For testing purposes, a flush can also be actuated
with a Geberit app.
26
Actuate automatic flush
An automatic flush is actuated by stepping away
from the WC.
▶
Leave the user detection range.
The automatic flush actuation is activated ex works.
It can be deactivated at any time with a Geberit
app.
9007203771121035 © 04-2022
970.755.00.0(00)