geberit SIGMA10 Instructions De Montage página 36

EN
Maintenance
Structure of Maintenance chapter
The accompanying illustration sequences must be
followed while carrying out the instructions provided
in this chapter. Each set of instructions refers to the
accompanying illustration sequence.
Maintenance performed by the
operator
The operator may perform the following
maintenance work and settings. → See operation
manual 970.766.00.0.
• Clean the actuator plate
• Replace the batteries
Maintenance performed by skilled
persons
The maintenance work described in the following
chapters may only be performed by skilled persons.
28
Replacing the control
1
Demount the actuator plate and unplug the
cable. → See figure sequence
2
Remove control and dispose of it appro-
priately.
3
Insert the new control.
1 , page 573.
9007203771121035 © 04-2022
970.755.00.0(00)