Protecting The Environment - Black and Decker BEPW1600 Manual De Instrucciones

Ocultar thumbs Ver también para BEPW1600:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

ENgLIsh
10. Actuate the pressure washer by rotating the ON/OFF dial
to the ON position.
11. Actuate the trigger of the spray handle to start
cleaning work.
MAINTENANCE

WARNING: To reduce the risk of serious personal
injury, turn unit off and disconnect it from
power source before making any adjustments or
removing/installing attachments or accessories.
An accidental start-up can cause injury.
Your BLACK+DECKER power tool has been designed to
operate over a long period of time with a minimum of
maintenance. Continuous satisfactory operation depends
upon proper tool care and regular cleaning.
Cleaning

WARNING: Blow dirt and dust out of all air vents with
clean, dry air at least once a week. To minimize the
risk of eye injury, always wear approved eye protection
when performing this procedure.

WARNING: Never use solvents or other harsh
chemicals for cleaning the non-metallic parts of the
tool. These chemicals may weaken the plastic materials
used in these parts. Use a cloth dampened only with
water and mild soap. Never let any liquid get inside the
tool; never immerse any part of the tool into a liquid.
Nozzle Cleaning (Fig. A, G)
If the nozzle becomes clogged with foreign materials, such as
dirt, excessive pressure may develop. If the nozzle becomes
partially clogged or restricted, the pump pressure will pulsate.
Clean the nozzle immediately using the nozzle cleaner.
1. Turn OFF and unplug the pressure washer unit 
2. Turn OFF the water supply.
3. Pull trigger 
on spray handle 
 7 
water pressure.
4. Remove the nozzle from the spray wand 
depressing the button 
5. Using the nozzle cleaning tool 
from the nozzle.
6. Run water from a faucet or garden hose through
the nozzle.
Filter Cleaning (Fig. A, L)
Inspect the filter 
 10 
before each use and clean if necessary.
Remove the filter element and run under clear water to
remove any debris.
Storage (Fig. H, I)
Store in a dry, covered location above freezing
temperature. sToRE INDooRs.
Always completely empty water from high pressure hose,
pressure washer unit, nozzles, and spray wand.
Nozzles can be stored in the unit as shown in Fig. H.
NoTE: The turbo (BEPW2200) or pen to fan nozzles can
be stored on the wand.
Power cord can be stored coiled up and secured with the
cord retaining hook 
 21 
30
 16 
to relieve any
 4 
 2 
by
.
 3 
, unclog any debris
 14 
as shown in Fig. I.
High pressure hose 
secured on the handle 
latch strap 
The spray handle 
unit using the bracket 
The spray wand 
unit using the bracket 
Accessories

WARNING: Since accessories, other than those
offered by BLACK+DECKER, have not been tested with
this product, use of such accessories with this tool
could be hazardous. To reduce the risk of injury, only
BLACK+DECKER recommended accessories should be
used with this product.
Recommended accessories for use with your tool are
available at extra cost from your local dealer or authorized
service center.
Repairs

WARNING: To assure product SAFETY and RELIABILITY,
repairs, maintenance and adjustment (including brush
inspection and replacement) should be performed
by a BLACK+DECKER factory service center or a
BLACK+DECKER authorized service center. Always use
identical replacement parts
If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons
in order to avoid a hazard.

PROTECTING THE ENVIRONMENT

Separate collection. This product must not be
disposed of with normal household waste.
.
Should you find one day that your BLACK+DECKER
product needs replacement, or if it is of no further use
to you, do not dispose of it with household waste. Make
this product available for separate collection.
Separate collection of used products and packaging
allows materials to be recycled and used again.
Re-use of recycled materials helps prevent
environmental pollution and reduces the demand for
raw materials. Local regulations may provide for
separate collection of electrical products from the
household, at municipal waste sites or by the retailer
when you purchase a new product.
 1 
can be stored coiled up and
 18 
with the help of the hook and
 27 
as shown in Fig. I.
can be stored onto the rear of the
 4 
as shown in Fig. I.
 26 
 2 
  can be stored onto the rear of the
 26 
as shown in Fig. I.

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Bepw1600lBepw1750Bepw1800tBepw2200

Tabla de contenido