Kitchen Timer; Button Lock; Oven Temperature Control - JENN-AIR JJW2430LM Guia

Kitchen Timer

The Kitchen Timer can be set in hours, minutes, and seconds.
NOTE: The Kitchen Timer does not start or stop the oven.
Tones/Sounds
Tones are audible signals, indicating the following:
■ Valid keypad touch
■ Function has been entered
■ Preheat cycle has been completed
■ Invalid keypad touch
■ End of a cooking cycle
■ When timer reaches zero
■ Includes using the Kitchen Timer for functions other than
cooking.
■ First oven element activation in a cooking mode.
Tools
The Tools selection key allows you access to functions and
customization options within the Electronic Oven Control. These
tools allow you to set the clock, change the oven temperature
between Fahrenheit and Celsius, turn the audible signals and
prompts on and off, and adjust the oven calibration, change the
language, and more. The Sabbath mode is also set using the
Tools selection key.
MODE AVAILABLE SELECTIONS
Sabbath
■ Sets Sabbath mode
Demo Mode
■ On
■ Off (Default)
Temp Units
■ Celsius
■ Fahrenheit (Default)
Language
■ Français
■ English (Default)
Display On/Off
■ Display Off
■ Display Dimmed (Default)
Clock On/Off
■ Clock Off
■ Clock On (Default)
Brightness
■ Max
■ High
■ Med (Default)
■ Low
■ Dim
Sound
■ Key Press
■ Timer & Alert (Default)
■ Power On & Off
Clock Theme
■ Textures
■ Celebration
■ Culinary
■ Clock Only
■ Animation (Default)
■ Spring
■ Summer
■ Fall
■ Winter
MODE AVAILABLE SELECTIONS
Time & Date
■ Daylight Saving
■ Clock Style
■ Set Clock (Default)
■ Set Date
Self Clean
■ Starts the Self Clean Cycle

Button Lock

■ Press Lock to lock controls
Number Entry
■ Number Pad
■ Scroll (Default)
Probe
■ Use for Probe Cooking Mode
Temp Calib.
■ +35°F to -35°F
■ +20°C to -20°C
Touch Calib.
■ Use to calibrate touch screen
Service Info.
■ Model Number and Serial Number
Legal Info.
■ License Information
Restore Defaults
■ Restores Factory Defaults
Button Lock
The Button Lock shuts down the control panel keypads to avoid
unintended use of the oven(s). The Button Lock will remain set
after a power failure if it was set before the power failure occurs.
When the control is locked, only the Power keypad will function.
The Button Lock is preset unlocked but can be locked.
To Activate the Button Lock:
1. From the Tools menu, touch BUTTON LOCK.
2. Touch LOCK to activate the Button Lock mode.
NOTE: The touch screen will return to idle mode and a control
locked message will be displayed.
To Deactivate the Button Lock:
1. Touch the Power keypad, and then follow the on-screen
directions.
NOTE: The oven will generate a random sequence of shapes
that must be touched in the order prompted on the screen.

Oven Temperature Control

IMPORTANT: Do not use a thermometer to measure the oven
temperature. Elements will cycle on and off as needed to maintain
a consistent temperature but may run slightly hot or cool at any
point in time due to this cycling. Opening the oven door will affect
cycling of the elements and impact the temperature.
The oven provides accurate temperatures and has been
thoroughly tested at the factory. However, it may cook faster or
slower than your previous oven, causing baking or browning
differences. If necessary, the temperature calibration can be
adjusted in either Fahrenheit or Celsius.
On double ovens, the upper oven and the lower oven can each be
calibrated independently.
A minus sign means the oven will be cooler by the displayed
amount. The absence of a minus sign means the oven will be
warmer by the displayed amount. Use the following chart as a
guide.
NOTE: The oven display will continue to show the original set
temperature and will not reflect the calibration offset. For example,
if set to 350° (177°C) and calibrated to -20, the display will
continue to show 350° (177°C).
5