Introduction Of Advanced Operations - Pioneer DEH-P4900IB Manual De Instrucciones

Available accessories
! If an error message such as ERROR-11 is dis
played, refer to the multi CD player owner's
manual.
! If there are no discs in the multi CD player ma
gazine, NO DISC is displayed.
Introduction of advanced
operations
You can use COMP/DBE (compression and
DBE) only with a multi CD player that supports
them.
Function mode 1
% Press FUNCTION repeatedly to switch
between the following functions:
REPEAT (repeat play) RANDOM (random
play) SCAN (scan play) ITS-PLAY (ITS play)
PAUSE (pause) COMP/DBE (compression
and DBE)
# To return to the playback display, press BAND.
# If you do not operate the function within about
30 seconds, the display is automatically returned
to the playback display.
Function mode 2
% Press FUNCTION and hold repeatedly to
switch between the following functions:
TITLE IN (disc title input) ITS (ITS program
ming)
# To return to the playback display, press BAND.
Function and operation
REPEAT, RANDOM, SCAN, PAUSE,
COMP/DBE and TITLE IN operations are basi
cally the same as that of the built in CD player.
Function name Operation
Refer to Selecting a repeat play
range on page 14.
But the repeat play ranges you can
select are different from that of the
built in CD player. The repeat play
ranges of the multi CD player are
REPEAT
as below:
! MCD Repeat all discs in the
multi CD player
! TRACK Repeat just the cur
rent track
! DISC Repeat the current disc
Refer to Playing tracks in random
RANDOM
order on page 14.
Refer to Scanning folders and
SCAN
tracks on page 14.
Refer to Using ITS playlists on the
ITS-PLAY
next page.
Refer to Pausing disc playback on
PAUSE
page 14.
Refer to Using compression and
BMX on page 14.
Multi CD player has DBE (dynamic
bass emphasis) function instead
COMP/DBE
of BMX.
The settings can be switched as
below:
OFF COMP 1 COMP 2 OFF
DBE 1 DBE 2
Refer to Using disc title functions
TITLE IN
on page 31.
Refer to Using ITS playlists on the
ITS
next page.
Notes
! If you select other discs during repeat play,
the repeat play range changes to MCD.
! If you perform track search or fast forward/re
verse during TRACK, the repeat play range
changes to DISC.
! After track or disc scanning is finished, nor
mal playback of the tracks will begin again.
! When playing a CD TEXT disc on a CD TEXT
compatible multi CD player, you cannot
switch to TITLE IN. The disc title has already
been recorded on a CD TEXT disc.
Section
03
29
En