KALLISTA P21661 Instrucciones De Instalación página 3

INSTALLATION INSTRUCTIONS
‰ Install a 1/2" NPT pipe nipple that extends 1/4" (6 mm) from the finished wall when fully tightened.
‰ Run water through the system to flush out dirt and debris.
‰ Apply sealant tape around the exposed threads of the pipe nipple.
‰ Thread the supply elbow onto the 1/2" pipe nipple.
‰ Using a clean strap wrench, tighten the supply elbow flush to the wall with the outlet oriented down.
‰ Apply a bead of clear silicone sealant around the perimeter of the supply elbow.
‰ Turn on the water and allow water to flow through the supply elbow.
‰ Check connection for leaks. Repair as needed.
1491200-2-A
3 of 8
1. INSTALL THE PIPE NIPPLE
2. INSTALL THE SUPPLY ELBOW
Wall Supply Elbow
Questions? Problems? For additional assistance, please contact KALLISTA's Customer
Service Department at 1-888-4-KALLISTA (1-888-452-5547) or kallista.com.