Approved Power Tool Attachments - Stihl HL 91 K Manual De Instrucciones

English
Working Techniques
Vertical Cut
Extra long reach without the need for
other aids.
Swing the cutter bar up and down in an
arc as you move along the hedge – use
both sides of the cutting blades.
12
Horizontal Cut
Hold the cutter bar at an angle of 0° to
10° as you swing the hedge trimmer
horizontally.
Swing the cutter bar in an arc towards
the outside of the hedge so that the
cuttings are swept to the ground.
Recommendation: Only cut hedges that
are no more than chest high.
Approved Power Tool
Attachments
The following STIHL attachments may
be used with the basic power tool:
Interchangeable
Attachment Application
HL 0°, 500 mm, Long reach hedge
with cutter guard trimmer
HL 0°, 600 mm, Long reach hedge
with cutter guard trimmer
HL 91 K