Power Tool Attachments; Mounting The Bike Handle - Stihl FS 110 Manual De Instrucciones

English / USA

Power Tool Attachments

HL-0/90°
HL-0°
HL-30°
HT BC
KW
FCS
Power tool attachments are not
approved for use with FS 85 X or
FS 110 X.
20
STIHL power tool attachments are
available for converting the single
purpose FS unit into other power tool
combinations.
FH
Your brushcutter is therefore the basic
power unit for a number of different
attachments with a broad range of
applications.
Power tool
attachment
1)2)
BC
2)
FCS
1)2)
FH
2)
HL - 0°
1)2)
HL - 30°
1)2)
HL - 0/90°
2)
HT
2)
KW
1)
Barrier bar must be fitted on loop
handle
2)
Unsuitable or not approved for
models with bike handle

Mounting the Bike Handle

Application
Cultivator
Power edger
Power scythe
Hedge cutter
Hedge cutter
Hedge cutter
Removing Clamp Moldings
Pole pruner
PowerSweep
:
:
:
:
:
3
2
6
4
1
5
Hold the lower clamp (1) and upper
clamp (2) firmly.
Release the wing screw (3).
The clamps are loose once the wing
screw has been released. They are
pushed apart by the two springs (4
and 5).
Pull out the wing screw.
Take the washer (6) out of the upper
clamp.
Separate the clamps.
Springs (4) and (5) remain in the
lower clamp.
FS 110