Before Use; Charging The Battery Pack (See Fig. A) - Parkside PLGK 12 A3 Traducción Del Manual De Instrucciones Origina

Before use

Charging the battery pack (see fig. A)
CAUTION!
► Always unplug the appliance before you remove the battery pack from
or connect the battery pack to the charger.
NOTE
► Never charge the battery pack if the ambient temperature is below
10°C or above 40°C. If a lithium-ion battery is to be stored for an
extended period, the charge level should be checked regularly. The
optimum charge level is between 50% and 80%. The storage climate
should be cool and dry and the ambient temperature should be
between 0°C and 50°C.
♦ Insert the battery pack
♦ Insert the power plug into the socket. The charge control LED
lights up red.
♦ The green charge control LED
and the battery pack is ready for use.
♦ Push the battery pack
♦ Switch the high-speed charger
successive charging processes. Also disconnect the power plug from
the mains power socket.
PLGK 12 A3
into the high-speed charger
indicates that charging is complete
into the appliance.
off for at least 15 minutes between
.
GB │ IE │ 7 ■