Before Use; Installation On A Wall - Parkside PLG 20 C3 Traducción Del Manual De Instrucciones Original

WARNING!
■ To avoid potential risks, damaged mains cables should be
replaced by the manufacturer, their customer service depart-
ment or a similarly qualified person.

Before use

Installation on a wall

WARNING!
■ Before wall mounting, make sure that there is no damage to
any cables in the vicinity of the drill holes required for the
mounting.
■ Route the mains cable so that it does not obstruct you and no
one can pull on it accidentally.
■ Do not allow children to play with the appliance, even when it
is mounted on the wall.
■ Never operate the charger on a combustible surface.
■ Never place the charger on a damp surface.
■ Mounting the charger behind doors or within their swinging
range is not recommended, as there is a risk of it being torn off
or otherwise damaged.
The charger has two holes on the back for wall installation. You can
hang it on a wall, taking the safety instructions into account. To do
this, use two screws (not supplied) with the specified dimensions and
spacing (see fig. on the fold-out page).
PLG 20 C3
GB │ IE │ 7 ■